Tracy Lebenzon
New member
I have an extra enterprise class server. It’s a Dell PE 2950. It has dual RAID 5 drive arrays, 16 GB of memory, and two dual core 3 GHz Xenon processors. It runs Windows 2008 R2 and i've installed my standard editing tools (CS5, PTGUI, Qimage ultimate).
It can put together one of my 11 frame stitches and/or save a 2.5 GB file in seconds. I access this computer by way of Remote Desktop (a.k.a. RDP). I want to start to print directly from this machine. I've never tried to configure a RDP accessed machine for a monitor profile before.
While it only took a couple of minutes to install the print driver for the Z3100, to complete the configuration I’ll need to install the monitor calibration profile made for my workstation on to the server. But I've never done this before and don’t know where the config files are supposed to be stored, and what all is involved in this process.
What is the way to do this? Do I need to connect my monitors to the server and then use the colorimeter to make a new profile or can I just take the profile already on my workstation and copy it to the server? Since i work with the monitors and video adapter on the workstation (not the server) this makes sense. But i don't know where the config files are, or if they are portable in this manner.
Any suggestions?
Thanks in advance
It can put together one of my 11 frame stitches and/or save a 2.5 GB file in seconds. I access this computer by way of Remote Desktop (a.k.a. RDP). I want to start to print directly from this machine. I've never tried to configure a RDP accessed machine for a monitor profile before.
While it only took a couple of minutes to install the print driver for the Z3100, to complete the configuration I’ll need to install the monitor calibration profile made for my workstation on to the server. But I've never done this before and don’t know where the config files are supposed to be stored, and what all is involved in this process.
What is the way to do this? Do I need to connect my monitors to the server and then use the colorimeter to make a new profile or can I just take the profile already on my workstation and copy it to the server? Since i work with the monitors and video adapter on the workstation (not the server) this makes sense. But i don't know where the config files are, or if they are portable in this manner.
Any suggestions?
Thanks in advance